Products > Trim

For pricing and ordering information call us toll free at 800-340-2435 800-340-2435 or Download the Product Catalog in .PDF Format

Browse our other products:

Trim can be made to your specifications. Call us for details.
Item	Length	Girth	Gauge	Description
RIDGE CAP	10’ 0" - 21' 0"	13 5/8	29 26	Standard pitch is 3/12. Please specify pitches greater than 3/12
FLAT RIDGE CAP	10’ 0” - 21' 0"	Variable	29 26	(A) Specify pitch of roof (B) Specify Length of each leg
FORMED RIDGE CAP (For R-Panel Only)	36"	39 (Coverage is 36")	26	to cap ridge for low pitch metal buildigs
SMALL CORNER	10’ 0” - 21' 0"	9 1/4	29 26	Used at corner connections or on the rake of building
STANDARD RAKE/CORNER	10’ 0” - 21' 0"	12 1/8	29 26	Used at corner connections or on the rake of building
INSIDE CORNER	10’ 0” - 21' 0"	12 1/8	29 26	Used tp trim inside corner connection of building
RAKE/CORNER (R-PANEL)	10’ 0” - 21' 0"	14	29 26	Used at corner connections or on the rake of building when using R-Panel
3 X 3 ANGLE	10’ 0” - 21' 0"	7	29 26	Used to trim corners or connections
GABLE TRIM	10’ 0” - 21' 0"	10 1/4	29 26	Used to trim gable ends and provides a drip edge away from the fascia
STANDARD EAVE	10’ 0” - 21' 0"	4 1/2	29 26	Commonly known as drip edge. Can be used around the perimeter of the building
J TRIM	10’ 0”	3 5/8	29 26	Used to trim around openings such as windows and doors
J TRIM (R-PANEL)	10’ 0” - 21' 0"	4 1/2	29 26	Used to trim around openings such as windows and doors when using R-Panel
BASE ANGLE	10’ 0” - 21' 0"	4 1/2	29 26	Also known as rat gaurds. Used to rodents from entering the building from under wall panels
DOUBLE ANGLE	10’ 0” - 21' 0"	4	29 26	Also known as S trim. Used for veritical panel to panel connections
DOOR JAMB	10’ 0” - 21' 0"	6 7/8	29 26	Used to trim out door jambs
END WALL	10’ 0” - 21' 0"	12	29 26	Used to flash wall to roof connections. Please specify roof pitch
SIDE WALL	10’ 0” - 21' 0"	12	29 26	Used to flash wall to roof connections. Standard degree is 90. Please specify pitch if this varies
TRANSITION	10’ 0” - 21' 0"	12	29 26	Used to flash transitions from roof to roof when pitch changes. Please specify both roof pitches
“V” VALLEY	10’ 0” - 21' 0"	20	29 26	Standard valley with wings for flashing valleys at roof connections
“W” VALLEY	10’ 0” - 21' 0"	20	29 26	Valley with center rib to slow velocity of water entering valley
TRACK COVER	10’ 0” - 21' 0"	12	29 26	Covers and flashes sliding doors and track
MANSARD CAP	10’ 0” - 21' 0"	Variable	29 26 24	Caps over masard or parapet wall. (A) Specify length of each leg (B) Specify width of top
SOFFIT	* Please specify	-	29 26 24	-
FLAT FLASHING	10’ 0” - 21' 0"	Please Specify	29 26	Available from 1” - 40 7/8” for 29 gauge Available from 1” - 41 9/16” for 26 gauge Avaliable from 1" - 48" for 24 gauge