|
Product
|
Description
|
|
|
Door Stop
|
![]() |
Stops the sliding door once it is fully open Keeps the door from being over torqued Helps to avoid wind damage to door |
|
Adjustable Door Stop
|
![]() |
Stops the sliding door once it is fully open Keeps the door from being over torqued Allows for greater adjustment from side of building than the nonadjustable door stop Helps to avoid wind damage to door |
|
Stay Roller
|
![]() |
Reduces friction at the bottom of the door Keeps the door from being pulled away from the side wall Located at a fixed position from the wall |
|
Adjustable Stay Roller
|
![]() |
Reduces friction at the bottom of the door Keeps the door from being pulled away from the side wall Can be adjusted to a degree from the wall |
|
Cover Bracket
|
![]() |
Snaps into the door track to support a track cover |
|
Endplug
|
![]() |
Fits into the end of the door track to keep birds, rodents, debris, etc. out of the track |
|
Handle
|
![]() |
Attaches to the sliding door for a grip to open and close the door Please specify Mill Finish or White |
|
Sliding Latch
|
![]() |
Latches the door using a sliding bolt Can also be used in conjunction with a padlock for security |
|
Center Latch
|
![]() |
Utilizes a latching rod to fasten two sliding doors together at the center Please specify 13” or 17” latching rod |
|
Latch (with chain)
|
![]() |
Similar to the center latch with the exception that a chain is used instead of a latching rod to fasten the sliding door together |
|
Door Track (key-hole)
|
![]() |
Round side mount track for sliding doors Built in mounting brackets Available in 8’, 10’, 12’ and 14’ (Longer lengths acquired using splice collar) * Side-mount in stock top-mount for pass-by doors available by special order |
|
Outside Rail
|
![]() |
Outside rail for sliding door framing Also used as the male side of the inside frame for split sliding doors Available in 8’, 10’, 12’, and 14’ (Longer lengths by special order) |
|
Inside Rail
|
![]() |
Female side of the inside frame for split sliding doors Available in 8’, 10’, 12’, and 14’ (Longer lengths by special order) |
|
Bottom Rail
|
![]() |
Bottom rail framing for sliding doors Available in 8’, 10’, 12’, and 14’ (Longer lengths by special order) |
|
Double-Track Side-Mount Bracket
|
![]() |
For mounting parallel runs of stud-bolt track for by-passing doors * Top-mount track for pass-by doors available by special order only |
|
Splice Collar
|
![]() |
Locks two track sections in alignment at the joint |
|
6 1/2" Trolley (with Offset)
|
![]() |
Trolley hanger for wood and metal framed doors Swivel stirrup provides up to 180º swing in either direction |
|
9 1/2" Trolley (with Offset)
|
![]() |
Trolley hanger for wood and metal framed doors Swivel stirrup provides up to 180º swing in either direction Adjusts vertically and laterally Has 5” thread for vertical adjustment |
|
Wood Door Trolley
|
![]() |
Trolley hanger for wooden doors Adjusts vertically and laterally |
|
Jamb-Latch
|
![]() |
Serves as a door pull, door guide, door stop, center lock, bridle hook, or even a boot pull |
|
Door Girt 14'
|
![]() |
20 gauge lock seam tube Adds strength to door, reduces weight and assures straightness where wood may warp |